<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>NDT技术论坛 - 磁粉检测（MT）</title>
    <link>https://ndt.sanmukeyi.cn/forum-41-1.html</link>
    <description>Latest 20 threads of 磁粉检测（MT）</description>
    <copyright>Copyright(C) NDT技术论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 02 Nov 2026 14:12:15 +0000</lastBuildDate>
    <ttl>90</ttl>
    <image>
      <url>https://ndt.sanmukeyi.cn/static/image/common/logo_88_31.gif</url>
      <title>NDT技术论坛</title>
      <link>https://ndt.sanmukeyi.cn/</link>
    </image>
    <item>
      <title>磁粉裂纹评级</title>
      <link>https://ndt.sanmukeyi.cn/thread-11120-1-1.html</link>
      <description><![CDATA[焊接接头磁粉检测裂纹不能评二级]]></description>
      <category>磁粉检测（MT）</category>
      <author>15277338352</author>
      <pubDate>Sat, 07 Dec 2024 14:38:22 +0000</pubDate>
    </item>
    <item>
      <title>显现缺陷方向示意图来自哪里？</title>
      <link>https://ndt.sanmukeyi.cn/thread-10959-1-1.html</link>
      <description><![CDATA[特种设备检验协会组织编写的《磁粉检测》（宋志哲主编，2版）第2章物理基础---2.7.3影响漏磁场因素--图2-56（见本贴附件的图）：显现缺陷方向示意图
请问此图怎么制作出来？根据什么公式？还是根据什么实验结果？
谢谢！
 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>NDT-YE</author>
      <pubDate>Wed, 02 Aug 2023 01:42:51 +0000</pubDate>
    </item>
    <item>
      <title>磁粉检测缺陷状况的影响</title>
      <link>https://ndt.sanmukeyi.cn/thread-8720-1-1.html</link>
      <description><![CDATA[磁粉检测缺陷状况的影响
缺陷性质的影响
缺陷种类很多，如裂纹、白点、气孔、重皮、夹渣等，这些缺陷由于其介质磁导率不同，进而缺陷产生的漏磁场也不同，这就造成了缺陷磁痕的显示能力不同。

缺陷形状和大小的影响
与磁场方向垂直的线、面状缺陷比气孔等圆形缺陷产生 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Mon, 30 Sep 2019 03:05:41 +0000</pubDate>
    </item>
    <item>
      <title>无损检测之磁粉检测的优缺点</title>
      <link>https://ndt.sanmukeyi.cn/thread-8719-1-1.html</link>
      <description><![CDATA[无损检测之磁粉检测的优缺点

磁粉检测的优点
可发现表面缺陷,如裂纹、夹杂、发纹、白点、折叠、冷隔和疏松等缺陷，缺陷形状、大小和位置显示直观一目了然；
对于工件表面的细小缺陷也能检查出来，有较高检测灵敏度；
采用合适磁化工艺，能检测到工件所有表面；
同其它 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Mon, 30 Sep 2019 03:03:31 +0000</pubDate>
    </item>
    <item>
      <title>请问能做高分辨魔角核磁共振?</title>
      <link>https://ndt.sanmukeyi.cn/thread-8673-1-1.html</link>
      <description><![CDATA[请问能做高分辨魔角核磁共振(HR/MAS NMR)技术直接用于跟踪固相合成反应,提供固载化化合物的结构信息？样品是粉末]]></description>
      <category>磁粉检测（MT）</category>
      <author>米格实验室</author>
      <pubDate>Thu, 22 Aug 2019 02:24:09 +0000</pubDate>
    </item>
    <item>
      <title>湿法磁粉检测中载液的选取</title>
      <link>https://ndt.sanmukeyi.cn/thread-7477-1-1.html</link>
      <description><![CDATA[湿法磁粉检测中用来悬浮磁粉的液体称为载液或载体，一般分为油基载液和水基载液。

·         油基载液
  

（1）磁粉检测用的油基载液是具有高闪点、低黏度、无荧光和无臭味等特点的煤油。

    闪点是指易燃物质挥发在空气中产生的蒸气能够燃烧时的最低温度。若油的 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>无损检测设备网</author>
      <pubDate>Tue, 27 Sep 2016 07:35:46 +0000</pubDate>
    </item>
    <item>
      <title>磁粉粒度越细越好吗？</title>
      <link>https://ndt.sanmukeyi.cn/thread-7472-1-1.html</link>
      <description><![CDATA[磁粉检测，作为无损检测五种常规检测方法之一，发展迅速，运用广泛。

    磁粉检测是靠磁粉聚集在漏磁场处形成磁痕来显示缺陷的，磁痕显示的程度不仅与缺陷性质、磁化方法、磁化规范、磁粉施加方式等条件有关，还与磁粉本身的性能有关。因此，了解和选择性能好的 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>无损检测设备网</author>
      <pubDate>Wed, 21 Sep 2016 09:21:38 +0000</pubDate>
    </item>
    <item>
      <title>磁悬液浓度的确定</title>
      <link>https://ndt.sanmukeyi.cn/thread-7470-1-1.html</link>
      <description><![CDATA[磁粉和载液按一定比例混合而成的悬浮液称为磁悬液。
    每升磁悬液中所含磁粉的重量（g/L）或每100mL磁悬液沉淀出磁粉的体积（mL/100mL）称为磁悬液浓度。前者称为磁悬液配制浓度，后者称为磁悬液沉淀浓度。
    磁悬液浓度对显示缺陷的灵敏度影响很大，浓度不同 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>无损检测设备网</author>
      <pubDate>Wed, 21 Sep 2016 09:15:13 +0000</pubDate>
    </item>
    <item>
      <title>磁粉与涡流（MT&amp;ET ） 国外相关标准目录</title>
      <link>https://ndt.sanmukeyi.cn/thread-7353-1-1.html</link>
      <description><![CDATA[磁粉与涡流（MT&amp;ET ） 国外相关标准目录]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Wed, 01 Jun 2016 14:52:38 +0000</pubDate>
    </item>
    <item>
      <title>磁粉与涡流（MT＆ET）国内无损检测相关标准目录</title>
      <link>https://ndt.sanmukeyi.cn/thread-7347-1-1.html</link>
      <description><![CDATA[磁粉与涡流（MT＆ET）国内无损检测相关标准目录]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Wed, 01 Jun 2016 14:33:49 +0000</pubDate>
    </item>
    <item>
      <title>关于磁粉检测中覆盖的问题</title>
      <link>https://ndt.sanmukeyi.cn/thread-7310-1-1.html</link>
      <description><![CDATA[磁粉检测中，通常为了100%的覆盖，需要一定的重复探伤范围，请问在磁轭探伤中，是否需要考虑近磁脚部位需要预留25mm的近磁场区的考虑，也就是两边需空出至少50mm的距离，请问对吗？]]></description>
      <category>磁粉检测（MT）</category>
      <author>肯尼检测</author>
      <pubDate>Mon, 28 Mar 2016 05:04:11 +0000</pubDate>
    </item>
    <item>
      <title>触棒法磁粉检测有效范围的测试与改进</title>
      <link>https://ndt.sanmukeyi.cn/thread-7298-1-1.html</link>
      <description><![CDATA[触棒法磁粉检测有效范围的测试与改进磁粉检测 图片来源：网络
触棒法作为磁粉检测的一种常用方法，因实际操作中的适用性及实用性较强，已经在各铸锻件毛坯检测中被广泛运用。

目前，常用的磁粉检测教材及各类行业标准对于触棒法磁粉检测的有效磁化范围是一个范围值或经 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Thu, 17 Mar 2016 07:28:03 +0000</pubDate>
    </item>
    <item>
      <title>我国磁粉检测技术应用与进展</title>
      <link>https://ndt.sanmukeyi.cn/thread-7132-1-1.html</link>
      <description><![CDATA[我国磁粉检测技术应用与进展
       
       据报道，我国最早的磁粉检测活动记录，是抗战时期随美国航空援华队带来的美国的蓄电池直流探伤机，用于航空工件的维修检查。到1949年新中国成立时期，我国也仅有屈指可数的几台磁粉探伤机。
       1949年后，随着我 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Fri, 13 Nov 2015 14:11:23 +0000</pubDate>
    </item>
    <item>
      <title>请求帮助</title>
      <link>https://ndt.sanmukeyi.cn/thread-5837-1-1.html</link>
      <description><![CDATA[各位老师您好：
      您有2014年7月举办的磁粉三级考试试题吗？如有恳请您发给我一份，本次考试（磁粉、铸、锻）方法、门类都没有通过，想查找一下原因，但大多题目都没有记住，所以哪位老师留有题目，恳请发给我一份，诚谢！邮箱地址：tszjzl@163.com
 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>lizhang</author>
      <pubDate>Mon, 11 Aug 2014 00:09:27 +0000</pubDate>
    </item>
    <item>
      <title>发送照片</title>
      <link>https://ndt.sanmukeyi.cn/thread-5833-1-1.html</link>
      <description><![CDATA[怎样才能将图片或附件发到帖子里？？哪位老师可以指点一下啊？我按照提示尝试了多次都没有成功。点击上传图片，桌面目录也选中了，点击打开就没有反映了，不知什么原因？]]></description>
      <category>磁粉检测（MT）</category>
      <author>lizhang</author>
      <pubDate>Sat, 09 Aug 2014 03:00:52 +0000</pubDate>
    </item>
    <item>
      <title>请求帮助</title>
      <link>https://ndt.sanmukeyi.cn/thread-5832-1-1.html</link>
      <description><![CDATA[各位老师您好：
    我这里有一个磁粉检测工艺卡编制问题向您请教。所给探伤仪型号有：CDX-3、CYE-1（电磁轭）、CXT-4000（旋转磁场），要求对一个铸钢件（法兰盘）编制探伤工艺卡，形状、规格见附图；根据所给的仪器，不知道采用什么方法进行检测为好，尤其是检测内表 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>lizhang</author>
      <pubDate>Sat, 09 Aug 2014 02:51:49 +0000</pubDate>
    </item>
    <item>
      <title>Cr12MoV淬火后磁粉探伤问题</title>
      <link>https://ndt.sanmukeyi.cn/thread-5192-1-1.html</link>
      <description><![CDATA[Cr12MoV淬火后表面有裂纹，但是磁粉探伤时磁力线分布特别乱，应该怎么办？？跪求解决办法！！小弟着急啊  ！！！！！]]></description>
      <category>磁粉检测（MT）</category>
      <author>悠然</author>
      <pubDate>Wed, 09 Apr 2014 11:37:38 +0000</pubDate>
    </item>
    <item>
      <title>磁粉检测工艺卡</title>
      <link>https://ndt.sanmukeyi.cn/thread-4752-1-1.html</link>
      <description><![CDATA[磁粉检测工艺卡]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Fri, 10 Jan 2014 07:13:16 +0000</pubDate>
    </item>
    <item>
      <title>上海圣波实业有限公司 环保型公司</title>
      <link>https://ndt.sanmukeyi.cn/thread-4678-1-1.html</link>
      <description><![CDATA[上海圣波实业有限公司专业从事无损检测、理化分析仪器的代理、生产、销售。渗透探伤，磁粉探伤，超声探伤，射线探伤，涡流探伤等五大类探伤仪器、辅耗材销售一站式服务。公司是一家生产无损检测器材的专业公司，主要生产的GV-ST（标准型）着色渗透探伤剂、核工业A级 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>圣波实业</author>
      <pubDate>Thu, 19 Dec 2013 07:49:07 +0000</pubDate>
    </item>
    <item>
      <title>无损探伤工艺规程-磁探伤工艺</title>
      <link>https://ndt.sanmukeyi.cn/thread-4170-1-1.html</link>
      <description><![CDATA[无损探伤工艺规程磁探伤
1、目的
本规程规定了铁磁材料及其制品（以下称工件）的磁粉探伤工艺。
2、适用范围
本规程适用于检查我厂铁磁材料制成的压力容器焊缝及工件表面或近表面的裂纹和其他缺陷，对于铁磁材料的半成品（铸件和锻件）及成品也可参照本规程检 ...]]></description>
      <category>磁粉检测（MT）</category>
      <author>傅兴森</author>
      <pubDate>Sun, 30 Jun 2013 06:20:46 +0000</pubDate>
    </item>
  </channel>
</rss>